Metron - Compact portable charging station 6-16A (3,7 kW)

Main features:

• ALL-IN-A PLUG design – NO bulky box on the cable
• 100% in-house developed miniature FULL feature vehicle communication module (Micro EVSE 1)
• Designed for 1-phase Mode 2 EV charging with currents up to 16A
• ADJUSTABLE CHARGING CURRENT (from 6A to 16A)
• Charging current can be changed even during charging process
• Over-temperature protection with SOFT-OFF capability and automatic reset
• PREMIUM quality EV cable used (Made in Germany)
• RAINPROOF
  

Cable properties * :

• Resistant to microbes, oil, dust and water
• Special cable design for long service life – Lapp Olflex Charge, orange colour
• Flexible at low temperatures (temp. range: -25°C to 80°C)
• Withstands high mechanical stress, in particular abrasion and sliding demands

[*] Applies to the insulated cable part only, not the electronics

Technical Specifications:

• Plug Type (EV Side): Type 2 (IEC 62196) Female Plug
• Plug Type (wall socket/grid side): Schuko – Type F
• Max. Charging Current: 16A (single phase)
• Charging current can be adjusted: 6A, 8A, 10A, 13A or 16A
• Selected charging current stays stored in internal memory even when disconnected from the socket (power) 
• Max. Charging Power: 3.7 kW
• Rated Voltage: 230V (single phase)
• Operating voltage range: from 180V to 270V (50/60Hz)
• Micro EVSE 1 inside EV plug – in-house developed FULL feature vehicle communication module
• Ultra accurate and temperature independent QUARTZ controlled EV communication frequency  
• User info via Blue LED light
• Detects/indicates ALL normal charging states (via Blue LED)
• Detects/indicates ALL faults (via Blue LED)
• Auto recovers from any possible fault !
• Cable Length: customer defined
• UV, oil and flame resistant cable insulation
• Operating Ambient Air Temperature Range: -30 °C to 40 °C (at full sun exposure)
• Integrated self re-settable over-temperature protection with SOFT-OFF capability
• IP Rating: IP54 (rain water resistant)
• 100% compatible with all electric vehicles that have Type 2 sockets (For example: VW e-Golf, BMW i3, Tesla Model S, Smart ForTwo ED, Mercedes B-Class Electric Drive, Mercedes S500 PHEV, Mercedes SLS EV, Mercedes Vito E-Cell Van, Porsche Panamera S PHEV, BYD e6, Volvo V60 PHEV, BMW i8, Audi A3 e-Tron, VW E-Up, VW Golf GTE, VW Passat GTE and many others. Normally works also with Renault Zoe, but this car is also grid sensitive, so we do not guarantee 100% compatibility!
• IEC 61851 compliant
• CE approved
• Warranty: 2 years
• plug with integrated OVER-TEMPERATURE PROTECTION
  • Ensures SAFE charging with high currents (16A)
  • Works totally independent
  • Terminates charging in case it gets too hot
  • Over-temperature is indicated via fast blinking blue LED on EV plug
  • Automatically resumes charging when it cools down
  • How it works: in case of bad quality wall socket that causes excessive heat generation this plug is able to detect that and disconnect charging. When this happens the blue LED light on the EV plug starts blinking fast. When everything cools down charging is automatically resumed.
• Ground fault protection device – 30mA RCD

RCD: A residual-current device (RCD), or residual-current circuit breaker (RCCB), is a device that quickly breaks an electrical circuit to prevent serious harm from an ongoing electric shock. Injury may still occur in some cases, for example if a human falls after receiving a shock, or if the person touches both conductors at the same time